LabVIEW VI Analyzer Toolkit User Guide12ni.comThe VIAn Easy Report VI, shown at left, converts the analysis results from the VIAn Easy Analyze VI into a report. You can specify whether the report is in ASCII or HTML format, which results to include, and where the VI saves the report file.Use the NI Example Finder to open the Easy VI Analysis VI. Select Help»Find Examples and select the Directory Structure view. Open the VIAnalyzer folder to find the Easy VI Analysis VI. This example VI runs a VI Analyzer task and generates an HTML-based report with the results.Open the block diagram. Notice that the example VI includes subVIs such as the VIAn Easy Analyze VI and the VIAn Easy Report VI, as shown in the following block diagram.Run the Easy VI Analysis VI. After the example VI runs, front panel indicators display the percentage of tests passed and failed and the total analysis time. A Web browser opens to display the HTML-based report. Compare the report to the one you created in 8,the Exporting VI 8,Analyzer 8,Results 8, section.You can use the Easy VI Analysis VI as a model when you create VIs using the VI Analyzer VIs. Refer to the LabVIEW Help for more information about specific VI Analyzer VIs.