Test & Measuring Instruments

Electronics Test and Measuring Instruments / equipments operating procedure. Techniques, tutorials & Information about testing and measurement

DS1000B Series Digital Oscilloscope

MATH Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope MATH Commands MATH Commands are used to display the result of adding, subtracting, multiplying and FFT operation for the signals from CH1, CH2, CH3 and CH4. The results can be measured by the grid and the cursor. […]

DS1000B Series Digital Oscilloscope

ALTernation Trigger Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope ALTernation Trigger Commands :TRIGger:ALTernation:SOURce :TRIGger:ALTernation:CURRentSOURce :TRIGger:ALTernation:TYPE :TRIGger:ALTernation:TimeSCALe :TRIGger:ALTernation:TimeOFFSet :TRIGger:ALTernation:LEVel :TRIGger:ALTernation:EDGE:SLOPe :TRIGger:ALTernation:PULSe:MODE :TRIGger:ALTernation:PULSe:TIME :TRIGger:ALTernation:VIDEO:POLarity :TRIGger:ALTernation:VIDEO:STANdard :TRIGger:ALTernation:VIDEO:MODE :TRIGger:ALTernation:VIDEO:LINE :TRIGger:ALTernation:COUPling :TRIGger:ALTernation:HFREject :TRIGger:ALTernation:HOLDoff :TRIGger:ALTernation:SENSitivity   :TRIGger:ALTernation:SOURce Command Format: :TRIGger:ALTernation:SOURce <source> :TRIGger:ALTernation:SOURce? Function: The command selects […]

DS1000B Series Digital Oscilloscope

PATTern Trigger Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope PATTern Trigger Commands :TRIGger:PATTern:PATTern Command Format: :TRIGger:PATTern:PATTern <value>,<mask>,<ext source>[,<edge source>,<edge>] :TRIGger:PATTern:PATTern? Function: The command sets the code pattern of signals. <value>: Code pattern values of the channels. It is a 16 […]

DS1000B Series Digital Oscilloscope

VIDEO Trigger Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope VIDEO Trigger Commands :TRIGger:VIDEO:MODE Command Format: :TRIGger:VIDEO:MODE <mode> :TRIGger:VIDEO:MODE? Function: The command sets the trigger sync mode as ODDfield, EVENfield, LINE or ALLlines. Returned Format: The query returns ODD FIELD, EVEN […]

DS1000B Series Digital Oscilloscope

PULSe Trigger Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope PULSe Trigger Commands :TRIGger:PULSe:MODE Command Format: :TRIGger:PULSe:MODE <mod> :TRIGger:PULSe:MODE? Function: The command sets the trigger condition. <mod> can be: +GREaterthan (positive pulse width greater than), +LESSthan (positive pulse width less than), […]

DS1000B Series Digital Oscilloscope

EDGE Trigger for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope EDGE Trigger Command :TRIGger:EDGE:SLOPe Command Format: :TRIGger:EDGE:SLOPe {POSitive|NEGative|ALTernation} :TRIGger:EDGE:SLOPe? Function: The command sets the trigger edge as POSitive (rising edge), NEGative (falling edge) or ALTernation (rising and falling edge). Returned Format: […]

DS1000B Series Digital Oscilloscope

Trigger Control for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope Trigger Control Commands :TRIGger:MODE :TRIGger<mode>:SOURce :TRIGger<mode>:LEVel :TRIGger<mode>:SWEep :TRIGger:SENSitivity :TRIGger:COUPling :TRIGger:HFREject :TRIGger:HOLDoff :TRIGger:STATus? :Trig%50 :FORCetrig :SINGLE   :TRIGger:MODE Command Format: :TRIGger:MODE <mode> :TRIGger:MODE? Function: The command sets the trigger mode as EDGE, […]

DS1000B Series Digital Oscilloscope

TRIGger Commands for DS1000B Series Digital Oscilloscope

Trigger system makes the meaningful waveform shown steadily. Trigger determines when the oscilloscope starts to acquire data and to display a waveform. When trigger is set up properly, it can convert unstable displays into meaningful waveforms. When the oscilloscope starts to acquire data, firstly enough data are needed to be collected so as to shape […]

DS1000B Series Digital Oscilloscope

TIMebase Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope TIMebase Commands are used to set horizontal scale and horizontal offset. Changing horizontal scale makes the waveform enlarge or shrink; and changing horizontal position will lead the waveform offset relative to […]

DS1000B Series Digital Oscilloscope

DISPlay Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope DISPlay Commands are used to set the display system. DISPlay Commands include: :DISPlay:TYPE :DISPlay:GRID :DISPlay:PERSist :DISPlay:MNUDisplay :DISPlay:MNUStatus :DISPlay:SCReen :DISPlay:CLEar :DISPlay:BRIGhtness :DISPlay:INTensity :DISPlay:DATA? Detailed introductions for each command are the following. […]

DS1000B Series Digital Oscilloscope

ACQuire Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope ACQuire Commands are used to set the acquisition mode for DS1000B Series Digital Oscilloscope. ACQuire Commands include: :ACQuire:TYPE :ACQuire:MODE :ACQuire:AVERages :ACQuire:SRATe? Detailed introductions for each command are the following. :ACQuire:TYPE […]

DS1000B Series Digital Oscilloscope

SYSTem Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope SYSTem Commands are used for the basic operations of an oscilloscope: RUN/STOP control, operation of the error queue and system setup data. SYSTem Commands include: :RUN :STOP :AUTO :SYSTem:ERRor :SYSTem:SETup […]

DS1000B Series Digital Oscilloscope

General Commands for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope IEEE Standards have defined some general commands which are applied to query basic information of the instrument or perform elementary operations. These commands always have 3 characters and with a […]

DS1000B Series Digital Oscilloscope

Command Systems for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope Command Format Description Comprises: Here we introduce every command in the DS1000B Series Digital Oscilloscope command systems. The introduction includes: Command Format Function Description Query/Returned Format and some other notices that […]

DS1000B Series Digital Oscilloscope

Parameters for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes: DS1204B | 200 MHz Digital Oscilloscope DS1104B | 100 MHz Digital Oscilloscope DS1074B | 70 MHz Digital Oscilloscope 5 Kinds Of Parameters  The commands contains 5 kinds of parameters, different parameters has different setting methods. Boolean The parameter should be “OFF”, “ON”, “0” or “1”. For example: :DISPlay:PERSist […]

Page 1 of 41234