Test and Measurement Instruments

Electronics test and measurement Instruments / Equipment operating procedure. Techniques, tutorials & Information about testing and measurement

Spectrum Analyzer Functions, Recommended Test Equipment

Spectrum Analyzer Functions, Recommended Test Equipment

To get the descriptions of specific test / functions of spectrum analyzer such as ESA and PSA Series Spectrum Analyzers the Agilent Technologies recommended Test Equipment. Signal Sources Test Equipment Specifications Recommended Model Signal Generator (2) 0.25 MHz to 4.0 GHz Ext Ref Input E443XB series or E4438C Adapters Test Equipment Recommended Model Type-N (m) […]

Comparing Signals On Spectrum Analyzer Using Marker Delta

Comparing Signals On Spectrum Analyzer Using Marker Delta

Using the Spectrum Analyzer you can easily compare frequency and amplitude differences between the signals. The analyzer delta marker function allows you to compare two signals when both appear on the spectrum analyzer screen at same time. In this procedure Spectrum Analyzer use 10 MHz signal to measure the frequency and amplitude differences between the […]

Spectrum Analyzer

Comparing Signals On Spectrum Analyzer Using Marker Delta Pair

Using the Spectrum Analyzer you can used to measure 10 MHz signal, frequency and amplitude differences between two signals on the same screen using the analyzer delta pair marker function. (First 3 steps are the same a in “Comparing Signals On Spectrum Analyzer Using Marker Delta“procedure) Step 1.Preset the analyzer: Press Preset button or Factory […]

Comparing Signals Not On Same Screen Of Spectrum Analyzer Using Marker Delta

Comparing Signals Not On Same Screen Of Spectrum Analyzer Using Marker Delta

You can measure the frequency and amplitude difference between two signals that do not appear on the screen at one time using Spectrum Analyzer. This technique is useful for harmonic distortion measurements tests when narrow span and narrow bandwidth are required to measure the low level harmonics. In this method the spectrum analyzer used 10 […]

Signal Generator to the Spectrum Analyzer

Resolving Signals of Equal Amplitude on Spectrum Analyzer

A decrease in resolution bandwidth is used in the combination with the decrease in video bandwidth to resolve the two signals of equal amplitude with the frequency separation of 100 kHz. Observe that the final RBW selection to resolve the signals is the similar width as the signal separation, while the VBW is a little […]

Signal Generator to the Spectrum Analyzer

Resolving Small Signals Hidden by Large Signals On Spectrum Analyzer

In this method uses narrow resolution bandwidths to resolve two input signals with the frequency separation of 155 kHz and the amplitude difference is of 60 dB. Step 1.   Connect two Signal Generators as sources to the Spectrum Analyzer Step 2.   Set one Signal Generator to 300 MHz at −10 dBm Press Frequency, […]

Decreasing the Frequency Span Around the Signal 1

Reducing Input Attenuation On Spectrum Analyzer

The ability to measure a low-level signal is limited by internally generated noise in the spectrum analyzer. The measurement setup can be changed in several ways to improve the analyzer sensitivity. The input attenuator affects the level of a signal passing through the instrument. If a signal is very close to the noise floor, reducing input […]

Decreasing the Frequency Span Around the Signal 1

Decreasing the Frequency Span Around the Signal Using Spectrum Analyzer

Using the Spectrum Analyzer signal track function, you can quickly decrease the span while keeping the signal at center frequency. This is a rapid way to take the closer look at the area around the signal to identify signals that would otherwise not be resolved. This procedure uses signal tracking and span zoom to view […]

Power Measurement with a Spectrum Analyzer attenuator

Power Measurement with Spectrum Analyzer

Use the Spectrum Analyzer to measure the signal produced by a signal generator. Equipment Required For Power Measurement Signal Generator Spectrum Analyzer Variable Attenuator Couple Of Cables For Interconnection Safety precaution Before starting remember that overloading a device like the power meter may become cause of damages.  Always estimate the power you are going to […]

5000 Series Oscilloscopes

5000 Series Oscilloscopes

• See more time at a higher resolution with 1 M points Mega Zoom III memory • See the most elusive signal details with up to 100,000 waveforms per second update rate and high-resolution display • Have more connectivity options with LXI class C compatibility and standard USB/LAN/GPIB ports Users of general-purpose portable oscilloscopes have, until now, had […]

6000L Series Low Profile Oscilloscopes

6000L Series Low Profile Oscilloscopes

• 4 channel scope in only 1U (43.6 mm space) • Up to 1 GHz bandwidth, 4 GSa/s sample rates and up to 8 M memory • Built in web browser for control with standard USB, LAN, GPIB interfaces, XGA out and LXI class C compliance The Agilent 6000L Series oscilloscopes give you just the right […]

N2780A Series AC/DC Current Probes

N2780A Series AC/DC Current Probes

• Various bandwidths: DC to 2 MHz, 10 MHz, 50 MHz and 100 MHz • Superior 1% accuracy, flat frequency response and high signal-to-noise ratio • Direct connection to high-impedance 1 MΩ BNC input of oscilloscope Compatible with any oscilloscope with a high-impedance BNC input, the new N2780A Series current probes offer accurate and reliable solution for measuring DC […]

N5413A DDR2 Compliance Test Application

N5413A DDR2 Compliance Test Application

• Easy operation reduces test time • Powerful analysis and debug • Thorough performance reporting With Agilent Technologies’ DDR2 compliance test application, you can perform automated testing and margin analysis based on the JEDEC specifications. The application automatically configures the oscilloscope for each test and provides informative results. It includes margin analysis indicating how close your device comes to […]

5000 Series Oscilloscopes

What is an Oscilloscope?

Oscilloscope is a basic electronic test instrument that is used to observe the electronic signal in graphical shape, typically voltage with respect of time. that is why Oscilloscope is time domain instrument. In other words it is a voltage versus time plotter. Oscilloscopes has two basic types, older one is analogue and now latest versions are in digital. Oscilloscope support various features […]

volt-ohm Multimeter What is VOM

volt-ohm Multimeter | What is VOM?

The multimeter, also called a volt-ohm meter (or VOM), is the basic tool for anyone working in electronics. You use a multimeter to take a variety of electrical measurements hence the term “multi.” With this one tool, you can You Can Measure From Multimeters Measure AC voltages Measure DC voltages Measure resistance Measure current going […]

Page 1 of 712345...Last »