EDGE Trigger for DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope covers following oscilloscopes:

  • DS1204B | 200 MHz Digital Oscilloscope
  • DS1104B | 100 MHz Digital Oscilloscope
  • DS1074B | 70 MHz Digital Oscilloscope

EDGE Trigger Command

:TRIGger:EDGE:SLOPe

Command Format:
:TRIGger:EDGE:SLOPe {POSitive|NEGative|ALTernation}
:TRIGger:EDGE:SLOPe?
Function:
The command sets the trigger edge as POSitive (rising edge), NEGative (falling edge) or ALTernation (rising and falling edge).
Returned Format:
The query returns POSITIVE or NEGATIVE, ALTERNATION.
Example:
:TRIG:EDGE:SLOP POS                      Set the trigger edge as rise edge.
:TRIG:EDGE:SLOP?                            Return POSITIVE.

 
All Trigger Control commands describe in
Trigger Control for DS1000B Series Digital Oscilloscope

All programming commands describe in
Command Systems for DS1000B Series Digital Oscilloscope