3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,635
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • GSP-830 User Manual 94 Run Pass/Fail test This section assumes that the limit line is already defined. Pass/Fail condition Checks whether the entire waveform amplitude stays between the high limit and low limit lines. Checks whether the peak waveform amplitude stays between the high and low limit lines. Checks whether the waveform valleys stay between the high and low limit lines. 1. Select condition 1. Press the Limit Line key. Limit Line 2. Press F5 (Pass/Fail) repeatedly to select the condition. Pass/FailF 52. Run Pass/Fail test 1. Press F4 (Pass/Fail On) to activate the test. Pass/FailOn OffF 4 2. The test result appears at the bottom of the display. Note If the limit lines are not defined, the Pass/Fail test uses the highest or lowest display level as the limit line. Save/copy/delete/rename limit line file Background Limit line files can be saved, copied, deleted, or renamed using the file utility. Press the File key to access each function. File Save/Copy Press F1 (Copy). For detailed steps, see page115. Copy...F 1 Delete Press F2 (Delete). For detailed steps, see page118. Delete...F 2 Rename Press F3 (Rename). For detailed steps, see page120. Rename...F 3