3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,538
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • GSP-830 User Manual 84 2. Set channel BW 1. Press F1 (Channel Setup). ChannelSetup...F 1 2. Press F1 (CH BW). CH BWF 1 3. Enter the channel BW using the Numerical and Unit keys. Range: 0kHz to Current span BK SPdBEnterGHz /SecmSecMHz /kHz / Secμ 4. The value is updated in the Channel BW column in MHz. Note: • If the span (page43) becomes less than the CHBW setting, the warning “Span is less than CHBW!” appears in the command window. • If the CHBW is 0kHz, the warning “CHBW is zero!” appears in the command window. 3. Set adjacent channel1 bandwidth 1. Press F4 (ADJ CH Offset). ADJ CHOffset...F 4 2. Press F1 (Adj CH BW1). Adj CH BW1F 1 3. Enter the adjacent channel 1 bandwidth using the Numerical and Unit keys. Range: 1kHz to 3GHz BK SPdBEnterGHz /SecmSecMHz /kHz / Secμ 4. The value is updated in the Adj CH BW1 column in MHz. 4. Set adjacent channel1 offset 1. Press F2 (Adj CH Offs1). Adj CH Offs1F 2 2. Enter the adjacent channel1 offset using the Numerical and Unit keys. Range: 1kHz to 3GHz BK SPdBEnterGHz /SecmSecMHz /kHz / Secμ 3. The value is updated in the Adj CH Offset1 column in MHz. 5. Set adjacent channel2 bandwidth 1. Press F3 (Adj CH BW2). Adj CH BW2F 3