3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,747
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • GSP-830 User Manual 172 Appendix GSP-830 Specifications The following specifications apply when the GSP-830 is powered on for at least 30 minutes within +18°C to +28°C. Frequency Range 9kHz to 3.0GHz Aging Rate ± 10ppm, 0-50°C, 5ppm/yr Span Range 2kHz to 3.0GHz in 1/2/5 sequence, full span, zero span Phase Noise -80dBc/Hz @ 1GHz 20kHz Offset typical Frequency Sweep Time Range 50ms to 25.6s RBW Range 3kHz, 30kHz, 300kHz, 4MHz RBW Accuracy 15% Resolution Bandwidth VBW Range 10Hz to 1MHz in 1-3 steps Measurement Range (Span: 50kHz, RBW: 3kHz) −103dBm to +20dBm: 1 MHz to 15MHz, Ref Lvl @ −30dBm −117dBm to +20dBm: 15MHz to 1GHz, Ref Lvl ≥ −110dBm −114dBm to +20dBm: 1GHz to 3GHz, Ref Lvl ≥ −110dBm Overload Protection Max. +30dBm, 25VDC Reference Level Range −110dBm to +20dBm Accuracy ±1dB @100MHz Frequency Flatness ±1dB Amplitude Display Range Linearity ±1dB over 70dB Average Noise Floor < −135±1dBm/Hz: 1MHz to 15MHz, Ref Lvl @ −30dBm < −149dBm/Hz, typical −152dBm/Hz: 15MHz to1GHz, Ref Lvl ≥ −110dBm < −146dBm/Hz, typical −149dBm/Hz: 1GHz to 3GHz, Ref Lvl ≥ −110dBm Third Intermodulation <-70dBc, RF Input @-40dBm, Ref Level @ −30dBm Harmonic Distortion <-60dBc, RF Input < -40dBm, Ref Level @−30dBm Dynamic Range Non-Harmonic Spurious (Span: 50kHz, RBW: 3kHz) < −93dBm: 1MHz to 15MHz, RefLvl ≥ −30dBm < −107dBm: 15MHz to 1GHz, RefLvl ≥ −110dBm < −104dBm: 1GHz to 3GHz, RefLvl ≥ −110dBm