3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,534
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • REMOTE CONTROL 169 Preset con:preset Presets the GSP-830. System con:sys:setup:save Save the current system setting. Parameter: 1to10 Example: con:sys:setup:save_1 (save current setup to setup1) con:sys:setup:recall Recalls a system setting from setup file. Parameter: 1to10 Example: con:sys:setup:recall_1 (recall setting in setup1 file) con:sys:gpibaddr? Returns the current GPIB address. con:sys:gpibaddr Sets the GPIB address. Example: con:sys:gpibaddr_2 con:sys:calsig Turns On/Off the auxiliary signal. Parameter: on, off Example: con:sys:calsig_on (auxiliary signal On) con:sys:clock:date? Returns the current date setting. Parameter: year/month/ day/ day of week 1 (Mon) to 7(Sun) Example: 2006/6/24/6 (June 24th, Saturday, 2006) con:sys:clock:date Sets the date. Parameter: year/month/day/ day of week 1 (Mon) to 7(Sun) Example: con:sys:clock:date_2006_6_24_6 (Jun24, Sat, 2006) con:sys:clock:time? Returns the current time setting. Parameter: hour : minute : second Example: 13:30:26 (1p.m., 30 minutes, 26 second) con:sys:clock:time Sets the time. Parameter: hour_minute_second Example: con:sys:clock:time_13_30_26 (1p.m., 30min, 26sec) con:sys:clock:show Turns On/Off clock display. Parameter: on, off Example: con:sys:clock:show_on (clock display On) con:sys:selftest? Returns the self test result. Parameter: 0 (fail), 1 (pass) in the following order: GPIB/Flash/SDRAM/RTC Example: 1 1 0 1 (GPIBpass,Flashpass,SDRAMfail,RTCpass) con:sys:lang Selects language. Parameter: 1 (English), 2 (Simplified Chinese) Example: con:sys:lang_2 (simplified Chinese) con:sys:ser? Returns the serial number. Example: EE8300000 con:sys:swver? Returns the software version. Example: v1.0 06/07/28 (version 1.0, 2006 July 28th) con:sys:fwver? Returns the firmware version. Example: v1.0 (version 1.0) con:sys:hwver? Returns hardware version in following order. RF, IF, DSP, MB Example: v1.0 v1.0 v1.01 v1.0 (RF: version 1.0, IF: version 1.0, DSP: version 1.01, MB: version 1.0) con:sys:optstatus? Returns optional items installation status in the following order. 300HzRBW, EMIFilter, 10k/100kHzRBW, TG, Demodulator, Medref (±1ppm stability) Parameter: 0 (not installed), 1 (installed) Example: 0 0 1 1 1 (TG, Demodulator, Medref are installed)