3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,694
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • GSP-830 User Manual 168 con:trig:single Sets the trigger condition to single. con:trig:cont Sets the trigger condition to continuous. con:trig:ext Sets the trigger to external mode. con:trig:delay Sets the trigger delay in msec. Example: con:trig:delay_1000 (1000ms delay) con:trig:freq Sets the trigger frequency in MHz. Example: con:trig:freq_1 (1MHz) Display con:disp:dim Selects the display dimmer level. Parameter: 0 to 5 Example: con:disp:dim_2 (dimmer level 2) con:disp:dl Turns On/Off display line. Parameter: on, off Example: con:disp:dl_on (display line On) con:disp:dl:level Sets the display line level in current unit. Example: con:disp:dl:level_−50 (display line at −50dBm) con:disp:title:show Sets and shows the display title. The title is case sensitive. Example: con:disp:title:show_SAtest (title is SAtest) con:disp:title:clr Clears the display title. con:disp:split:upper Turns On and sweeps upper window in split window mode. con:disp:split:lower Turns On and sweeps lower window in split window mode. con:disp:split:alt Sweeps the upper/lower window alternatively in split mode. con:disp:split:full Goes back to full screen mode. File con:file:copy Copies file. Need to specify the source and destination file. Parameter: ta/tb/tc (traceA/B/C), t1to10 (trace1to10), lh/ll (high/low limit line), lh1to5 (high limit line 1to5), ll1to5 (low limit line 1to5), c1to5 (correction set 1to5), q1to10 (sequence 1to10), s1to10 (setup 1to10), file name in USB flash drive Example: con:file:copy_t10_ta (copy from trace10 to traceA) Example: con:file:copy_ta_mytrace (copy from traceA to a file in external USB flash named mytrace) con:file:del Deletes file. Need to specify the source and destination file. Parameter: ta/tb/tc (traceA/B/C), t1to10 (trace1to10), lh/ll (high/low limit line), lh1to5 (high limit line 1to5), ll1to5 (low limit line 1to5), c1to5 (correction set 1to5), q1to10 (sequence 1to10), s1to10 (setup file 1to10), file name in external USB flash drive. Example: con:file:del_t10 (delete trace10) Example: con:file:del_myspace (delete a file names myspace in extrenal USB flash drive) con:file:prtsc:tofile Saves the display image to external USB flash drive. Need to specify the file name. Example: con:file:prtsc:tofile_myscreen (saves the display image to a file named myscreen)