3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,640
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • REMOTE CONTROL 165 meas:tra:read? Returns trace data. Parameter:1(traceA), 2(traceB), 3(traceC), all(all three traces) Example: meas:tra:read_1? (traceA data) meas:tra:a<>b Swaps trace A and B. meas:tra:a+b>a Adds trace B to A. meas:tra:a−b>a Subtracts trace B from A. meas:tra:const? Returns the constant value to be added or subtracted. meas:tra:const Sets the constant value to be added or subtracted. meas:tra:a+const>a Adds a constant value to traceA. meas:tra:a−const>a Subtracts a constant value from traceA. meas:tra:det? Returns the detection mode. Parameter: 1(normal), 2(sample), 3(peak+), 4(avg), 5(qpeak) meas:tra:det Sets the detection mode. Parameter: 1(normal), 2(sample), 3(peak+), 4(avg), 5(qpeak) Example: meas:tra:det_4 (set the detection mode to average) Power measurement meas:ch:bw? Returns the main channel bandwidth. Example: 1000 khz meas:ch:bw Sets the main channel bandwidth. Need to specify the unit. Example: meas:ch:bw_1_mhz (1MHz) meas:adjch:bw? Returns the adjacent channel bandwidth in kHz. Need to specify the channel. Example: meas:adjch:bw_2? (adjacent channel2 bandwidth) meas:adjch:bw Sets the adjacent channel bandwidth. Need to specify CH and unit. Example: meas:adjch:bw_2_1_mhz(adj CH2 BW 1MHz) meas:adjch:offs? Returns the adjacent channel offset in kHz. Specify channel. Example: meas:adjch:offs_2? (adjacent channel2 offset) meas:adjch:offs Sets the adjacent channel offset. Specify channel and unit. Example: meas:adjch:offs_2_1_mhz (adjacent ch2 offs 1MHz) meas:acpr? Returns ACPR activation status. Parameter: on, off meas:acpr Turns On/Off ACPR measurement. Parameter: on, off Example: meas:acpr_on (ACPR On) meas:acpr:lower? Returns the lower ACPR result. Need to specify 1 or 2. Example: meas:acpr:lower_2? (lower ACPR 2 result?) meas:acpr:upper? Returns the upper ACPR result. Need to specify 1 or 2. Example: meas:acpr:upper_2? (upper ACPR 2 result?) meas:acpr:chup Moves the ACPR channel up. meas:acpr:chdown Moves the ACPR channel down. meas:chspc? Returns the channel space in kHz. meas:chspc Sets the channel space. Need to specify the unit. Example: meas:chspc_10_mhz (10MHz)