3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,553
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • GSP-830 User Manual 164 meas:mark:tocen Moves a normal/delta marker to the center frequency. Parameter: 1 to 5 (marker ID) Example: meas:mark:tocen_1 (marker 1 to the center freq) meas:mark:tost Moves a normal/delta marker to the start frequency. Parameter: 1 to 5 (marker ID) Example: meas:mark:tost_1 (marker 1 to the start frequency) meas:mark:tostp Moves a normal/delta marker to the stop frequency. Parameter: 1 to 5 (marker ID) Example: meas:mark:tostp_1 (marker 1 to stop frequency) meas:mark:toss Moves a normal/delta marker to the + step. Parameter: 1 to 5 (marker ID) Example: meas:mark:toss_1 (marker 1 to + step) meas:mark:torefl Moves a normal/delta marker to the reference level. Parameter: 1 to 5 (marker ID) Example: meas:mark:torefl_1 (marker 1 to the reference level) meas:mark:trace Moves a normal/delta marker to a trace. Parameter: 1 to 5 (marker ID), followed by 0 (auto), 1 (traceA), 2 (traceB), 3 (traceC) Example: meas:mark:trace_1_2 (marker 1 to traceB) meas:mark:marktable:on Activates marker table. meas:mark:marktable:off Deactivates marker table. meas:mark:peaktable:on Activates peak table. meas:mark:peaktable:off Deactivates peak table. meas:mark:peaktable:sortf Sorts peak table by frequency. meas:mark:peaktable:sorta Sorts peak table by amplitude. meas:mark:peaktrack:on Turns On peak track. Parameter: 1 to 5 (marker ID) Example: meas:mark:peaktrack:on_1(marker1 track on) meas:mark:peaktrack:off Turns Off peak track. Parameter: 1 to 5 (marker ID) Example: meas:mark:peaktrack:off_1(marker1 track off) meas:mark:peakthres:on Turns On peak threshold and sets amplitude. Parameter: peak threshold in dB. Example: meas:mark:peakthres:on_−30 (−30dB threshold) meas:mark:peakthres:off Turns Off peak threshold. Trace meas:tra Sets the mode for a trace. Parameter: 1 (traceA), 2 (traceB), 3 (traceC), followed by 1(clear), 2(peak hold), 3(view), 4(blank) Example: meas:tra_1_2 (traceA set to peak hold mode) meas:tra:avg:on Turns On average mode and sets average number for a trace. Parameter: 1(traceA), 2(traceB), 3(traceC), followed by No. Example: meas:tra:avg:on_1_20 (Average trace A 20 times) meas:tra:avg:off Turns Off the average mode. Parameter: 1 (traceA), 2 (traceB), 3 (traceC) Example: meas:tra:avg:off_1 (traceA average mode Off)