3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 2,153
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • GSP-830 User Manual 158 Configure Interface Interface type USB slave USB 1.1 or 2.0, type B mini RS-232C D-sub 9 pin GPIB (optional) 24 pin No need for panel configuration: Just connect a type B mini USB cable to the rear panel. USB slave port configuration The USB icon turns on when the connection is detected. RS-232C configuration 1. The RS-232C configuration can be checked from the system menu. Press the System key. System 2. Press F3 (Serial Port). Serial Port..F 3 3. The RS-232C port configuration appears. Configure the PC according to this setting. Baud: 57600 Parity: None Stop bit: 1 Data bit: 8 Stop1F 3Baud57600F 1ParityNoneF 2Data8F 4 4. Connect a 9-pin male RS-232C cable to the rear panel terminal. GPIB (optional) configuration GPIB interface is a factory installed optional item. Contact the service center for a new installation. 1. Press the System key. System 2. Press F2 (GPIB Add). GPIB Add8F 2