3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,746
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • SEQUENCE 137 Edit Sequence 1. Select sequence 1. Press the Sequence key. The display enters into the sequence edit mode. Seq 2. Press F1 (sequence 1 to 5) or F2 (sequence 6 to 10) repeatedly to select the sequence ID. Select Seq6 7 8 9 10F 2Select Seq1 2 3 4 5F 1 2. Start editing 1. Press F3 (Edit). Edit...F 3 2. Press F1 (Start Edit). Start EditF 1 3. The Start Edit sign in the mid-right of the display turns green. Start Edit2a. Add step 20 steps are available for each sequence. Every key operation can be recorded as a step. Press the Enter key each time to confirm step entering. (In some cases this is not necessary: check if the item appears in the window). Example: Activate system auxiliary signal 1. Press the System key. 2. Press F4 (Aux Sig On). 3. Press the Enter key. System Aux SigOn OffF 4 Example: Run Autoset 1. Press the Autoset key. 2. Press F1 (Autoset). 3. Press the Enter key. Autoset AutosetF 1 The result looks like this. Aux Sig OnAutoset