3.0 GHz Spectrum Analyzer GSP830 User Manual

3.0 GHz Spectrum Analyzer GSP830 User Manual
Pages 181
Views 1,705
Downloads : 1 times
PDF Size : 4.4 MiB

Summary of Contents

3.0 GHz Spectrum Analyzer GSP830 User Manual

  • SYSTEM 127 4. Connect a 9-pin male RS-232C cable to the rear panel connector. GPIB configuration (optional) The GPIB interface is a factory installed optional item. Contact service personnel for a new installation. 1. Press the System key. System 2. Press F2 (GPIB Add). GPIB Add8F 2 3. Select GPIB address using the Left/Right keys, Scroll knob, or Numerical keys. Configure the PC according to this setting. BK SPGHz /SecmSecMHz /kHz / Secμ 4. Connect GPIB cable to the rear panel terminal. Check GPIB installation status 1. To check the GPIB installation status, press the System key. System 2. Press F6 (More). More...F 6 3. Press F4 (System Config On). System ConfigOn OffF 4 4. The system configuration appears. When the GPIB module is installed correctly, the check box is marked. Installed Uninstalled Check GPIB self-test result 1. To check the internal GPIB functionality result, press the System key. System 2. Press F6 (More). More...F 6