GSP-830 User Manual 120 Rename File File rename is allowed only for external (USB flash drive) files. 1. Connect USB flash drive Connect the USB flash drive to the front panel connector. The USB icon turns on when the flash drive is detected. 2. Select file 1. Press the File key. File 2. Press F3 (Rename). The USB flash drive contents and the character table appear in the display. Rename...F 3 3. Point the cursor to the file using the Up/Down keys. 3. Edit file name 1. Press F1 (Edit File Name) and turn it on. F 1Edit File NameOn Off 2. Move the cursor inside the character table using the Left/Right keys or Scroll knob. Press the Enter key to confirm each character. Char TableA BC DEFGHI JK LMNO PQ RS TU VW XY Za bcd e fghijklmno pqrstuvwxyz 0 1234 5678 9 3. When completed, press F1 (Edit File Name Off) to turn it off. F 1Edit File NameOn Off 4. Press F2 (Confirm). A confirmation message appears in the command window. ConfirmF 2 ENTER for Yes: BKSP for No: 5. To accept renaming and save the new file name, press the Enter key. To cancel renaming, press the BK SP key.